Grey Iron Material, 60mm Filter Water Medium Flange End Y Strainer Valve

The valve features:


1. Simple shape, good manufacturing technology, wide application range, easy to install.
2. Reasonable and compact structure, full appearance, can filter impurities in the medium in the work.
3. The medium can flow through the inlet direction of the valve, filter through the filter, and flow out from the outlet to achieve the purpose of filtration

Connection size:

Main part material

Usage:

1. This product is suitable for nominal pressure ≤ 1.6mpa, temperature 0℃~120℃ water, ≤ 0.2mpa saturated steam, oil pipeline, can filter the dirt, precipitation, rust and other debris in the medium
2. The valve is from the medium into the inlet, through the filter to achieve the purpose of filtration, outflow from the outlet

Storage, installation and precautions:

1. This product is installed on the pipeline to filter impurities in the pipeline and protect the normal operation of valves or equipment.
2. Bypass the pipe for installing the product.
3. The pipe and valve cavity should be cleaned before installation.
4. The valve shall not be subject to large external force after installation.
5. When the local minimum temperature is lower than 4℃, insulation protection should be done; As the end valve, it should be heated with a pipe or jacket to prevent the temperature of the pipe wall from falling below 0℃.
6. It is strictly prohibited to install and use in the pipeline under vibration or rapid changes in medium temperature.
7. The product is usually installed at the inlet of the pressure reducing valve, hydraulic control valve and other equipment. The installation position should be 6-10 times from the diameter of the protection valve, and the flow direction of the medium should be consistent with the arrow direction on the valve body; Otherwise, the filtering effect cannot be achieved.
8. The pipe and valve cavity should be cleaned before installation. The cleaning cycle within 3 years after installation and use is as follows, and once a year after 3 years.

Technical parameters:

· Nominal pressure: 1.6mpa
· Nominal diameter: DN32-450mm
· Applicable temperature and medium:
·The main material is gray cast iron, applicable temperature 0℃ ~ 120℃, applicable medium: water, ≤ 1.0mpa steam, oil products;
·The main material is ductile iron, applicable temperature 0℃ ~ 200℃, applicable medium: water, ≤ 1.0mpa steam, oil products;
· Design and manufacture: GB/T12233 refer to the universal valve iron globe valve and lift check valve
· Structure length: GB/T12221 metal valve structure length or manufacturer's standard
· Connecting end: JB/T 78 integral cast iron flange
· Inspection and test: GB/T13927 industrial valve pressure test

Yuanda Valve Group Co., Ltd., founded in 1994, is headquartered in Yincun, Longyao, Hebei, China, the hinterland of Bohai Economic Rim surrounding Beijing and Tianjin. With a registered capital of RMB 200 million, Yuanda currently has 8 subsidiaries, of which 6 are in China and 2 overseas. Among them, the core company, which covers an area of 540,000m2 and has more than 3500 employees, is the largest high,midium and low-pressure valve manufacturing base specializing in valve development, manufacturing, and sales in China.

Yuanda has obtained DNV·GL, ISO9001: 2015、ISO14001:2015、OHSAS18001:2007, API6D（6D-0759）, CE, KS, and EAC certifications. Its""trademark is evaluated as Famous Trademark of China and Famous Brand in Hebei Province, and the product series produced under"" is a trademark registered in Korea and products produced under this trademark enjoy a good reputation in both international and domestic markets. Yuanda has been named “Credit Management AA-Rating Enterprise” by the General Administration of Quality Supervision, Inspection and Quarantine and granted the title of “China Quality Trustworthy Enterprise” by China Entry and Exit Inspection and Quarantine Association. It is also a holder of Manufacture License of Special Equipment Level A and Casting Certificates Grades B, B1, and B2, and a member of China Valve Association council, a corporate member of China Foundry Association, and a provincial enterprise technology center in Hebei. Yuanda has been granted the power to carry out import and export operations on its own and is an approved supplier of PetroChina (CNPC) and Sinopec, Guodian, Huaneng, Huadian, Datang and China Power, and China Aluminum, CCESCC, Shougang, Wuhan Iron and Steel Company, and Hebei Iron and Steel Company.

Yuanda manufactures to standards including GB/JB(china), ANSI, API, AWWA, DIN, BS, JIS, EAC, NF and so on, and uses HT200, HT250, QT400, QT450, WCA, WCB, WCC, CF3, CF8, CF3M, CF8M, 1Cr5Mo, LCB, among others, to produce a great variety of valves including gate valves, globe valves, ball valves, butterfly valves, check valves, diaphragm valves, pressure-relief valves, plug valves, and traps, which are available in 12 main categories, 200 series and 4000 specs, totaling 120,000 tons a year. These products are widely used in all civil sectors covering petroleum, petrochemical, chemical, power generation, metallurgy, water system, pharmaceuticals, urban construction, and water supply and drainage.